Thursday, January 28, 2016

Why facebook block your accunt

Blocking is one of the things that really hated everyone, but no administrator who perform blocking for reasons that are useful, of course there is no problem cause of the blockage and it very much. Like Facebook, many users are blocked while less than 2 days to 2 weeks maximum, this is an automated performance because each blocking is done counting each user to do something that is considered SPAM.

Every website must have Policy or Terms page to see rules that can be performed on the website, and if the break will be blocked, most things of this kind conducted on the forum site. There are many ways that can be done to block such users from IP / Proxy is used, Browser and UserAgent Location State, as well as the account stored in the database.
Why facebook block your accunt

If Facebook does not cause blocking that allows the suspension namely Block meantime. Many things that make the user temporarily blocked because of his actions alone were calculated disrupt the activities of friends, would feature used to be closed during the blockade ends.

Facebook considers Block While as pengguna'an features too quickly and from there already seen it disrupt the activities of friends. Some of the things that cause it can be seen below.!
  1. Send - It can cause temporary blocking when messages are sent more than 20 times in the last 10 minutes for a friend, and 10 times in the last 10 minutes for others. Pengguna'an too often be considered a robot and the account will be suspended in the near term
  2. Adding Friends - This will cause a temporary blocking if a user adds a friend of more than 15 people within 1 hour. This is a common thing people do to get a temporary blocking. If the feature of adding friends used continuously, the account will be retained to not be able to add friends in the long term
  3. Comments Status - This can cause a temporary block when users comment on the ongoing status as of 20 comments for 10 minutes with no reply, will be better when commenting on the status of the others and leave unrequited. It often occurs as a result of this kind of bad behavior such as inconsequential character pressed on the keyboard and clicking Enter
  4. Creating Status - This can cause temporary blocking when users create status continuously canal, such as 20 status every 1 minute, so it is not considered to be a robot and do not disturb are also on page / fanspage Magazine
  5. Liking Status - This can cause temporary blocking if users like your friends' status is kept, like 20 like per 1 minute, of the things that can be called a robot or use similar side Javascript script. This is one feature that does not create an account and only blocked temporarily on hold in the near term.
  6. Upload - This can cause temporary blocking if users perform file uploads are kept, each file is calculated and limited, not least with the image. Like 50 files every 10 minutes and the account will be given a warning after it got blocked while.

That's the umpteenth things to make the temporary block. Again, facebook will not downloading account suspension if pengguna'an not continue the canal within 24 hours, if violated, the account will automatically be deleted and the profile was not found. All of the above I test with a fake facebook account using bots with the help of legal software and the results are suspended within 2 days.

Be careful with sites that want to access the data (token) with a request for approval which many not least the user is offline permissions, This is dangerous because even if the user is offline, the robot can still send something. Suggestions I, Allow an application that allows a trusted site and secure, using SSL (HTTPS) and do not include the E-mail and password on all sites except Facebook, because login facebook on external sites can be done either with OAuth and not wearing Email / Phone and Password.

How can unblock your facebook account please read this article: 

How to unlock your Facebook blocked account

Facebook is one of the most popular social network of all time. That already has millions - millions of active users every day in various parts of the world. Facebook account used not only to share information but also as a tool to strengthen the relationship to you / i and the public. In addition there is a satisfactory usability facebook so that each person can not feel bored to see facebook every day.

Active users on facebook probably already know the flaws and annoying things that exist in the social network, so do not want to repeat the same events. And to this day, something that makes people feel annoyed is when the account is locked facebook only for trivial matters. Actually it is a testament to the affection facebook users to keep their account remains safe and secure.
How to unlock your Facebook blocked account

There are many things that make the account is locked suddenly. Suppose login from a different browser. For example, when you enter a long facebook use Opera Mini, then did logout. And log in again using UC Browser. Then it can be considered a type of account theft. Because the IP address / Proxy of both browsers different countries that pose the account is locked for a while.

And how to cope if a facebook account has been locked.? Actually easy and requires a bit of patience to do so. The following procedures can be attempted or made the experience when your account is locked temporarily. Please see below.!
  1. First Go to facebook using the device browser to be used frequently. If there is writing Your account is locked temporarily, just please click Continue.
  2. Then there will be a captcha (security code) please write as shown. And click continue.
  3. After that will be taken to a page option to unlock a locked account. Sometimes there are 2 to 4 option is selected. Such as date of birth, the Security Question, Guess pictures of friends, and sign in using the browser used previously.

(WAY 1)
  1. If there is an option to allow entry using the browser used, please refer to the browser and log in using the browser. When entering facebook will be immediately asked to change the password and the issue is resolved.

(HOW 2)
  1. If no such option is one way, but there is an option choice of date of birth. Please select the option.
  2. When choosing these options will be directly questioned about the complete birth date is the day, month, and year. Please fill in accordance with the date of birth is in the locked facebook account.
  3. After inputting the correct date of birth, will be taken directly to the page change password and after that issue is resolved.
  4. Most likely this option is only found by facebook account governing the privacy of date of birth in private. In other words the public, so no one knows except the owner.

(HOW 3)
  1. If the option is on the way 2 does not exist, then use the option Security question. This option is very difficult for the forgetful and can not be tried 1 to 2 times to try to correct. For that will I share a secure way can recall many times the security question
  2. First of all please go to facebook and click forgot password. Then look for an account that is locked Facebookmu.
  3. Once there yard recovery password, please click on the link "Do not have access to here again?" And will be taken to the page to enter a new Email, please fill in the email is up.
  4. After that will be taken to a page security questions. Please try many times the security question you remember the yard is because there is no limit to try.
  5. If successful, it will be taken to a page to change the password. Please skip this page and go straight back into the locked facebook account, and include answers to questions such as who has managed to facebook earlier. Then will be taken to a page to change the password and the issue is resolved.

(HOW 4)
  1. If the option means 3 is not available, then there is no other way to select an option Guess friend's photo. This makes it fairly difficult for those who have friends who are not known, but take it easy because there is no way that is a bit easy to guess correctly.
  2. Before choosing this option, you should log in using your facebook account to another and toward a locked account profile. Please go menu Friends and memorized some friends who appeared on approximately 20 list. Memorize contained enough facial images only. Memorize the fact that it should be remembered well.
  3. If the possibility has been recalled, please logout of the account and go back into the account is locked and just select the option to figure out photos of friends and doing well. Special appearance image list initially close friend who often like, comment, and inbox. And then 20 images of friends who often active, and the latter is a random photos of all your friends.
  4. In order to pass this option, have to guess the correct photos with a minimum of 5 photos. After that will be taken to a page change password and the issue is resolved.

It takes patience to be able to get back the account is locked, especially if only on the way to the 4th course, it was just luck if you have a friend 5ribu's. Keep in mind, too, that each perform step 2 to 4 not to answer perfunctory because there are restrictions soften. So if the wrong answer several times will get a notice "Limit exceeded hour or hourly limit exceeded" next option selection. If you've got the message, you can not select that option and had to wait 12 hours ahead.

All the above step has to be an experience I do. And until now facebook account I never again locked. Each year always have differences on facebook, and possible ways above could no longer useful. But do not worry, I will continue to monitor through the comments, if some of the above methods can still be used or not. The suggestion of I, do not ever use the services of other air-desire to open a facebook account that is locked by means email, password, and the information Another important. 

Facebook Status tricks work on Friends

Facebook one of the networks most used by users in the world. In Pakistan alone, many who use Facebook, over the course of time is certainly more than can be imagined. Even today a lot of kids ranging from 6th grade've made a Facebook account. Internet has always had something new that makes netizens have always wanted to try. Such as sites that provide interesting content that makes people curious, or want to do it constantly. Just like a game, facebook is not only used to share something, but many also are using Facebook as a means of secure transactions via message. So as I know myself, many foreign products are widely used automated methods using Facebook chat, so to transact no need to suffer anymore.
Facebook Status tricks work on Friends

Not only Facebook, but Twitter is also favored by Internet users worldwide. But in terms of many Facebook users. If Twitter is not as many features of Facebook, and features available on Twitter like Cover, Hashtags, and Followers to exist on Facebook, while Facebook features, such as games, group, and others are still there. Indeed, in the Facebook search for someone is easy, can be directly from the phone or suggestion by Facebook itself. And who would I also share about Facebook, which is where you will lose if you do not try, who knows a friend you still do not know how that I share this time.

There are two methods that will I bear, and of course it is easy if listening to right. This is actually an old trick, but it has long been many who did not try or could be intended no longer popular at this particular time, to the way that I share this little chances of people who can do it as well and just reading this article or blog else who would understand . Remember you with up old tricks such as making blue status? Well that's what I'm going to share, and there is one more thing that makes people confused and always thinking of how to give it a try. Okay here is the trick, please see below.

STATUS BLUE
1. First please go to facebook and copy the code below.
    @@[1: [0: 1: STATUS HERE]]

2. Notice the red text simply change the text up, then try to create status with the code and see the results.

STATUS STRANGE
1. First please go to facebook and copy the code below.
    @@[1:[1111:1]]

2. Results of the above code will be @ [1111: 1]. The trick, try to get someone to type the @ symbol [1111: 1] in the comments field, certainly will not be. Meanwhile, if you are told to do so again, stay with the symbol above this post in the comments field.

Only two tricks are the most steady for now. If used a lot, until the status of long, status live stream, and much more, but now it can not. Need nothing course, the trick above is not harmful, and do not mean illegal in any form, because only utilize the existing TAG feature on Facebook. Especially for the second trick, if done from a PC, initially if someone commented using a PC, can write the code, but when reload or refreshed, the code will be lost. But it is different with a special code that I for the above, will display the same code even reload or refreshed repeatedly.

There might be confused why is that in a second way. So if there are people who write code eg @ [1111: 1] it will be a name or just the number 1 only. So from figure 1 that can be thought that the prefix code is no longer readable and legible only one course, and when trying to write @ [1111: anu] it will only show the word anu only. Therefore, if the collaboration be this @ [1111: @ [1111: 1]] will just be code @ [1111: 1] only. Is it understood? If you have other tricks, or anyone you want to ask about the above, please comment.

Overcoming Force Close On SIM settings Messages On Android

Any excess must be contained deficiencies. And deficiencies can always be handled correctly. On Android phones must never find semcam system errors that make people always irritated or difficult. Examples such as applications that suddenly closed without any problems, this can be due to a system error or the application that mengalaimi corrupt. But most are experiencing corrupt data and to address the real easy, because it must delete the data, and reset all settings as before. But there were also errors contained on the stock ROM, and to overcome it also must wait for the update of his cell phone.

If the error of the stock ROM it is difficult to remove and one way to do the turn of custom ROMs and mobile phones need diroot first. In some phones Chna mostly had an error on the part settings SIM messages, and when the head of the section, will automatically direct exit or practically force close. Of course it is very annoying because it could lead to either SIM message settings to set any such delivery report, SMSC, and much more. And I have some alternative ways to overcome this, of course, does not need the ROOT.
Overcoming Force Close On SIM settings Messages On Android

ROOT indeed have a mobile phone can be used more than usual. Could set up their own cell phone in accordance capabilities. I myself do ROOT only for its own purposes and utilize terminal and install some scripts like cURL, busybox, and others to make the phone better and faster. But there were also people who do ROOT only to cheat on games played, of course if it is only used for that alone, it is not useful. And there are many people who do ROOT to make the cell phone more bertampilan cool and have understood all the elements of a cell phone, so when the phone suffered brick, can be overcome without bringing to a handyman service.

Back to the SIM messages that go out alone, it can be ascertained that there are applications on the system does not match with the one thing that is used today on the phone, there are other applications could include the ban, can be of the language, and so on. If the phone has been in ROOT, of course the biggest problem is the SMS application in the system need to be replaced. And while mobile phones are not diroot, this is just a simple problem that can be solved with up to factory reset. But before doing a factory reset, it would be better to try this way first. Please see below.

  1. Change To English - Please change the language settings and make as English. Then try to enter to the SIM message settings, if it could mean there's a problem in SMS applications that exist in the system. To overcome cell phone can wait for the update.
  2. Clear Data Messaging - Please go application settings and delete data in Messaging. then try to reopen the settings SIM messages, if you can open, which means corrupt the data on the messaging experience.
  3. Try to Download Application SMS Alternative - please try to download the application that is useful to send a message, for example, Go SMS. Please try towards setting SIM messages, if could mean the problem is in the SMS application on the system.
  4. Perform Factory Reset - This is a last resort if the above methods can not be used. Just do a factory reset and I guarantee that it works, because it is restoring all the settings like a new cell phone.
Just a little ways can I share, and I would suggest to try from the top before performing a factory reset. Usually enough to change the language to English or Chinese are not going to find a force close. There is a big possibility, mobile phones are experiencing this kind supports IDOS, so concerned with language still less manageable. If the phone you use has the status ROOT, simply delete the messaging application on the system or could be intended uninstalling. Then take the messaging of the firmware file and reinstall. Usually this works, or it could also replace it with alternative SMS app. There are so many on the Play Store and can be selected as desired.

How To Overcome Download Play Store Always On Loss

All smartphones have always had a special application to download content such as games, apps, music, movies, to books. Of course not all free and those that are paid in accordance with the developer. If on Android phones already exist Play Store or Google Play. With the application users can search for any content desired and can perform fast and stable downloads. Without the Play Store, the user may have trouble downloading games or applications of existing websites, for the Play Store as for advertising or trap the download link to jump to the desired content.

There are differences phones that makes people feel like anything he had felt the odd result. And most are from the Play Store. This could be caused by various things, and problems existing in the Play Store is classified as more than one. I have also discussed about improvement Play Store that can not do the weekly display an error message. That is because hosts that exist on the system is likely that many phones that have been experienced by ROOT status, but if not, they can be overcome by telling that factory reset. Already a few times I have problems that exist in the system hosts file and it had to be done diversion and removed the additional part of the Google URL leaving localhost only as well as its IP address.

Problems on the Play Store can indeed be overcome by a factory reset, but there were also a way that can be done without having to do it. And here I will discuss the application download or playstore that get jammed at the end of the download, for example, is almost finished and then jammed and did not run. This could be because of the data / cache that needs to be removed and may also want to restart the Play Store that is like from the beginning. Refund Play Store as early do not need to perform a factory reset and only need to remove any Google account and sign in again and try to download again, sometimes it works and there is no jam again.

Jams can also be due to too many renewal applications that have not been updated, so it would be better to update the application so that the performance is better when the Play Store to download other content. As for the other matters of arrangement that can perform automatic updates Play Store version, this should not be switched on only when not using a fast network, while using Wi-Fi, but if slow, it will interfere with the content download process is running. Only a few tips that will I bear to address the Play Store jammed when the download is almost complete. Please see below.

  1. Clear Data and Cache - Please remove the data and cache or cache on the application settings. It could be the data has been corrupted and one way to fix this is to delete it. Calm down, to delete data will not do entry / re-login, and on the way to the Play Store will only be asked to accept the terms of the withdrawal after a login from your Google account.
  2. Turn off Automatic Update - Please go Play Store and turn off automatic updates, please select a Do not perform automatic updates.
  3. All Application Update Available - Please do updates on all applications that are ready to be updated. One of the things I've experienced myself, after doing updates of 25 more applications, and try to download, no longer stalled at 97%
  4. Delete Google Account - If the above methods still can not cope with this, please delete and re-enter your Google account. To remove please go to Settings, and in part simply select Google Account. Then click on the email address, then click the options menu on the top right and click Delete Account. When it was removed, please go to the Play Store and please go back.
  5. Factory Reset - If all of the above methods is not possible, please do a factory reset or arguably, restore to factory settings. Perhaps all applications will be lost, but the Play Store will feel like new again and the mobile phone as well as new again.
Please do the above manner from the top to goto the bottom. Suggestions I simply remove any Google account and can be sure there will not be jammed when downloading. At the Gingerbread Android phones may not be able to do a Google Account deletion because it is used as the primary and to remove them must perform a factory reset. This type of problem experienced by many Android phones with 512Mb RAM which have many applications installed, so you should not put too much application unless the application is opened every day. But if the application is not used in long time, should do the uninstall.

How to Overcome USB Android Not Detected On PC

All smartphones have a special hole that can be connected to a computer, the cable can be connected to a PC or other support used to transfer files and receive mentioned as USB. Most people do this than with Bluetooth, as a result of the process is very fast depending on kecepatn existing memory, usually the higher the class memory, then the sooner the process of sending files. But in addition to Bluetooth, now it's been a lot of applications using WiFi networks to transmit files, and must still less quickly when compared send using USB, but faster than with Bluetooth.
How to Overcome USB Android Not Detected On PC

In the old phone also has provided special hole for USB, for example, only Nokia. There is a special hole that resembles charge CDMA mobile phone old, and mobile formations now only uses one hole the same, so it can be used to charge and USB, except for holes headset, but there were also old phones that combine it all, from the charge, UB and pit headset , namely the old phone made by Sony. There are many people who use a different USB cable to charge it, with the intention of not using a USB cable plant, but it's better to use the original cable because it fits with the battery and safely.

Knowing that today a lot of a Power Bank which in one package also charge for some phones, usually the person using the USB cable manifold without knowing whether it is a USB cable or simply to charge? And the answer, cable existing charge on the Power Bank can only be done for a charge and could not be done sending the file to the PC / Computer. So if you try to use the charge cable from the Power Bank on the PC, it would only be do charge only and no notif that the features of the USB was prepared.

USB cable is not seen from the short length of cable sizes, because a lot of cable that has a short measure that supports USB, but some are not, such as in charge cable Power Bank which mostly have very short size. So here I want to explain how to cope with Android that are not detected by the PC, with the intention of not be able to transfer files on the SD Card and Internal Memory. This is not a complicated problem and still can be overcome if you are experiencing this kind of thing. Normally users need only click the File Transfer button on the page that is in the notification, but if after clicked, no response on the PC, with this there seems to be an incorrect setting on the phone, and to overcome them please see below.
  1. First of all please turn your Android phone and connect it to the PC using USB, it would be better to use the original USB cable from the phone manufacturer.
  2. Furthermore, once connected to a PC, USB is detected automatically if there will be a notice like Tap the button to transfer files and please click. Wait a few seconds, if there is no any response from the PC, please try again.
  3. When it is repeated again but is still not detected, please go to Settings and click Storage.
  4. In the Storage section, will be a USB-shaped icon on the top right or Bismol named Connection USB Computers, please click.
  5. Now in this section, please check the Media Device (MTP) and wait a few seconds, would be detected.
Way above does look difficult when just seen it, but it would be easier if he practiced. So basically, the user only needs to provide a check or tick on the Settings section of the Media (MTP), because if not given the check, then the PC will not be able to read the data on the entire memory. But there are also people who have experienced problems when his cell phone with a PC can be connected by USB but only detects any internal memory, while the SD card is not detected, these are problems that can be experienced two reasons, namely an error in the phone or SD Card itself. My advice if you experience something like that please try to connect with a SD Card Reader mode, if detected means no error on the SD Card. And if the fault is on the phone, the thing to do is a factory reset, or if Custom ROM frequently change, it could be an error on custom worn and should be replaced. If anyone wants to ask please comment.

Increase your blog pageviews by using smart links

How to Easily Put SEO Smart Links On Postings Blog- mas Dion Blog Hello friends, this time I want gives a tutorial how to plug SEO smart link in the post / article of your blog. Well usefulness of SEO Smart link mounting technique is intended to provide a signal to Google that more crawl links in our blog article and to advance SEO techniques to increase Page Views Blog itself.
Increase your blog pageviews by using smart links

How it works from the SEO Smart Links is very easy that is by displaying one or more characters that leads to a specific link where the link is a link you another article that you think is related to an article on your blog. If you are curious to know how the installation of SEO Smart Links in Blog you please see the discussion below.

For how very easy installation, consider the following tutorial:
  1. The first step please go first to the Edit HTML template >>
  2. Then how the code </ body>
  3. Then place the following code before the code </ body>

<script type='text/javascript'>
function smartLink(){
this.keywdHref = new Object();
this.add = function(keyword, href){
if(keyword.substr(0,1) != &quot; &quot;){keyword = &quot; &quot; + keyword;}
this.keywdHref[keyword] = href;
}
this.createAnchor = function(){
var objs = document.getElementsByTagName(&quot;div&quot;);
for(var i=0; i&lt;objs.length; i++){
var obj = objs[i];
if(obj.className.indexOf(&quot;post-body&quot;)&gt;-1){
var content = obj.innerHTML;
for(var keyword in this.keywdHref){
var href = this.keywdHref[keyword];
var newstr = content.replace(keyword, &quot;&lt;a href=&#39;&quot;+href+&quot;&#39;&gt;&quot;+keyword+&quot;&lt;/a&gt;&quot;, &quot;gi&quot;);
obj.innerHTML = newstr;
content = newstr;
}
}
}
}
this.startScript = function(){
var onLoad = window.onload;
window.onload = function(){
if(onLoad){onLoad();}
setTimeout(&quot;f.createAnchor()&quot;, 100);
}
}
}
</script>
<script type='text/javascript'>
var f = new smartLink();
f.add(&quot;SEO&quot;, &quot;http://entertainment-plateform.blogspot.com/&quot;);
f.startScript();
</script>
If you want the plugin above only appear on a page posting only, want the plugin above only appear on a page posting any, please add the conditional tags page special post.

On the javascript code, just replace your word like "SEO" with your own keywords pal specify and change http://entertainment-plateform.blogspot.com/ with the url of your own blog (highlighted).

You can add more words just simply adding these javascript lines in your code where the already code marked, like this:

f.add(&quot;SEO&quot;, &quot;http://entertainment-plateform.blogspot.com/&quot;);
f.add(&quot;Template&quot;, &quot;http://entertainment-plateform.blogspot.com/&quot;);
f.add(&quot;Blogger&quot;, &quot;http://entertainment-plateform.blogspot.com/
&quot;);

If you want to add your word in bold, so simply add these code with your words.

f.add(&quot;&lt;b&gt;SEO&lt;/b&gt;&quot;, &quot;http://entertainment-plateform.blogspot.com/
&quot;);

It is advisable not to add excessive keyword, from 1 to 3 keywords is enough.

Conditional Tags for your blogger to make more responsive

Conditional Tags for your blogger to make more responsive

There are a few tricks to hide elements of both the blog on the home page / homepage, posts, static pages or by adding a conditional tag code in each element you want to hide.

Example
<b:if cond='data:blog.pageType != "static_page"'>
..... The contents of the content to be wrapped conditional tags (Content will be hidden in the static pages) .....
</b:if>

Not only hides an element but it could be to display only certain elements in the page that you specify.

Example
<b:if cond='data:blog.url == data:blog.homepageUrl'>
..... The contents of the content to be wrapped in the conditional tag (content will only appear on the home page) .....
</b:if>
for more details please refer to some function conditional tag for widget below: 


1. Widget displays only on the home page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.url == data:blog.homepageUrl'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>

2. View the Widgets only on the post page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.pageType == "item"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>

3. View the Widgets only on certain page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.url == "Your URL"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>
Change "Your URL" to your page url.

4. Hiding the Widgets only on certain page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.url != "Your URL"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>
Change "Your URL" to your page url.

5. Display Widgets only on a static page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.pageType == "static_page"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>

6. Hide Widgets on a static page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.pageType != "static_page"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>

7. Widgets display only on the archive page:


<b:widget id='HTML1' locked='false' title='Recent Posts' type='HTML'>
<b:includable id='main'>
<b:if cond='data:blog.pageType == "archive"'>
<!-- only display title if it's non-empty -->
<b:if cond='data:title != ""'>
<h2 class='title'><data:title/></h2>
</b:if>
<div class='widget-content'>
<data:content/>
</div>
<b:include name='quickedit'/>
</b:if>
</b:includable>
</b:widget>

Once you add a tag conditional upon, save the template and see the results. Not limited to the widget, with conditional tags you can wrap other elements such as scripts, CSS, or HTML template for reasons accelerate blog by reducing the script contained in a page or other privacy reasons. May be useful.

Sunday, January 24, 2016

Alexis Responsive Blogger Template (EP Free Templates)

Alexis is a free blogger template adapted from WordPress with 2 columns, responsive design, right sidebar, minimalist, posts thumbnails, related posts support, well designed threaded comments, girly looking, simple look and vintage style.

Alexis Responsive Blogger Template (EP Free Templates)

Responsive & Fast template for blogs about any general topic, to write a diary or fashion.

Download Alexis for free from EP:

Ivision Responsive Blogger Template (Free by EP)

Invision Responsive Blogger Template
As a routine work I search lots of free stuff for my friends, now I'll share the back of free templates. Invision is the first free template from EP Design in the early 2016 's . Appearance of this template was adopted from New Line premium template.
Invision Responsive Blogger Template.png


The following features in the template Invision this
Features Availability
Responsive True Check
Google Testing Tool Validator True Check
SEO Friendly True Check
Mobile Friendly True Check
Dynamic Heading True
Adsense Ready True
Valid Schema.org True
High CTR True
Personal Blog True
Disqus Comment System True
2 Column True
Auto Read More with Thumbnail True
Responsive Ad Slot True
Breadcrumbs True
About Me Widget True
Related Posts with Thumb True
Search Box True
Social Share Button True
Responsive Dropdown Menu True
News Ticker True
Smooth Back to Top True
Custom Subscribe Box Widget True
Custom Pop up Contact Form True
Shortcodes True
Unlimited Page Numbered True

Well for demos and download links , please click on the button below


Wednesday, January 20, 2016

Blogger XML Operator and Syntax Updates 2015

Blogger Logo

Recently Blogger has released several new operators for the syntax of XML them. This new syntax allows us to be able to write code templates that better, more logical and more efficient. In addition to reducing the size of the file is XML, the new syntax also allows developers to be able to find new potentials in manipulating the template code Bloggers who used mostly only we can do with JavaScript. Here is a summary ...

And

Before

<b:if cond='data:blog.searchQuery'>
<b:if cond='data:numPosts &gt; 10'>
The search results by the number of posts more than 10 ...
</b:if>
</b:if>

After

<b:if cond='data:blog.searchQuery and data:numPosts &gt; 10'>
The search results by the number of posts more than 10 ...
</b:if>
<b:if cond='data:blog.searchQuery &amp;&amp; data:numPosts &gt; 10'>
The search results by the number of posts more than 10 ...
</b:if>

Or

Before

<b:if cond='data:blog.pageType == &quot;index&quot;'>
Pass the test ...
</b:if>
<b:if cond='data:blog.pageType == &quot;item&quot;'>
Pass the test ...
</b:if>

After

<b:if cond='data:blog.pageType == &quot;index&quot; or data:blog.pageType == &quot;item&quot;'>
Pass the test ...
</b:if>
<b:if cond='data:blog.pageType == &quot;index&quot; || data:blog.pageType == &quot;item&quot;'>
Pass the test ...
</b:if>

Not

Before

<b:if cond='data:comment.isDeleted'>
<b:else/>
Comments are not erased here ...
</b:if>
<b:if cond='data:comment.isDeleted == &quot;false&quot;'>
Comments are not erased here ...
</b:if>

After

<b:if cond='!data:comment.isDeleted'>
Comments are not erased here ...
</b:if>
<b:if cond='not data:comment.isDeleted'>
Comments are not erased here ...
</b:if>
Which can not be:
<!-- TEMPLATE ERROR: 'not' term cannot be used as operator except when preceding 'in' or 'contains' -->
<b:if cond='data:comment.isDeleted not &quot;false&quot;'>
Comments are not erased here ...
</b:if>
<!-- TEMPLATE ERROR: Extra characters at end of string: buf=[!] remainder=["false"] -->
<b:if cond='data:comment.isDeleted ! &quot;false&quot;'>
Comments are not erased here ...
</b:if>
Which can be:
<b:if cond='not data:comment.isDeleted == &quot;false&quot;'>
Comments are not erased here ...
</b:if>
<b:if cond='!data:comment.isDeleted == &quot;false&quot;'>
Comments are not erased here ...
</b:if>

Ternary Selector

Before

&lt;html class=&#39;<b:if cond='data:blog.pageType == &quot;item&quot;'>
page-item
<b:else/>
page-non-item
</b:if>&#39;&gt;

&lt;/html&gt;

After

<html expr:class='data.blog.pageType == &quot;item&quot; ? &quot;page-item&quot; : &quot;page-non-item&quot;'>

</html>
<html expr:class='&quot;page-&quot; + (data.blog.pageType == &quot;item&quot; ? &quot;&quot; : &quot;non-&quot;) + &quot;item&quot;'>

</html>

Membership

Almost the same as the operator or, just that all references must be the same comparison, values ​​are distinguished:

Before

<b:if cond='data:comment.author == &quot;Taufik Nurrohman&quot;'>
Admin comment ...
</b:if>
<b:if cond='data:comment.author == &quot;Taufik&quot;'>
Admin comment ...
</b:if>
<b:if cond='data:comment.author == &quot;Admin&quot;'>
Admin comment ...
</b:if>

After

<b:if cond='data:comment.author in {&quot;Taufik Nurrohman&quot;,&quot;Taufik&quot;,&quot;Admin&quot;}'>
Admin comment ...
</b:if>
<b:if cond='data:comment.author in [&quot;Taufik Nurrohman&quot;,&quot;Taufik&quot;,&quot;Admin&quot;]'>
Admin comment ...
</b:if>
<b:if cond='{&quot;Taufik Nurrohman&quot;,&quot;Taufik&quot;,&quot;Admin&quot;} contains data:comment.author'>
Admin comment ...
</b:if>
<b:if cond='[&quot;Taufik Nurrohman&quot;,&quot;Taufik&quot;,&quot;Admin&quot;] contains data:comment.author'>
Admin comment ...
</b:if>

Else If

Before

<b:if cond='data:blog.pageType == &quot;item&quot;'>
<data:post.body/>
<b:else/>
<b:if cond='data:blog.pageType == &quot;static_page&quot;'>
<data:post.body/>
<b:else/>
<data:post.snippet/>
</b:if>
</b:if>

After

<b:if cond='data:blog.pageType == "item"'>
<data:post.body/>
<b:elseif cond='data:blog.pageType == &quot;static_page&quot;'>
<data:post.body/>
<b:else/>
<data:post.snippet/>
</b:if>
or…
<b:if cond='data:blog.pageType in {&quot;item&quot;,&quot;static_page&quot;}'>
<data:post.body/>
<b:else/>
<data:post.snippet/>
</b:if>

Reference:

Tuesday, January 19, 2016

Alarm Clock Pro v6.15 for Android Download Free

Alarm Clock Pro v6.15 for Android Download Free


Also with MASTER variation:
– You assist modest designer to develop this excellent request: )
– Annual/Birthday/Anniversary security alarm
– “Any alarm” can be duplicated “every month”
– Absolutely no advertising (no request lock-ups, cheaper battery power usage)
– Total security alarm pages assist
– Tremble to help sleep
– Snooze count up to help 100
– Cyclic security alarm do it again nearly 90 days
– Dropbox synchronization
– Widgets are usually resizeable (>= Operating system 3. 1).
– Widgets can be added to lockscreen (>= Operating system 5. 2).

Burglar alarm classes:
– Swift – create a note/alarm with a couple easy keys to press
– Everyday – runs everyday
– Do the job days to weeks – runs with picked do the job days to weeks
– Cyclic – runs every x-th evening
– Timer – easy timer (countdown) security alarm
– Almost any – calendar collection
– Twelve-monthly – birthday, loved-one’s birthday (PRO only)

Characteristics:
– security alarm pages
– normal “Dismiss/snooze button”, math trouble or perhaps arrange/complete estimate.
– a digital and also analog time widget
– soothing security alarm – raising ringtone method, custom made sleep period or perhaps rely plus much more…

Alarm clock PRO v6.15 Permissions
– READ_PHONE_STATE – to help discover incoming call and also sleep security alarm.
– RECEIVE_BOOT_COMPLETED – to line alarms soon after telephone start out.
– ACCESS_NETWORK_STATE, INTERNET – examining pertaining to brand new request variation.
– WRITE(READ)_EXTERNAL_STORAGE – backup/restore options.
– WAKE_LOCK – to help get up device and also indicate inform windowpane promptly (without this permission alarms won’t do the job until finally device display is actually turned on)
– DISABLE_KEYGUARD – disable display fasten as soon as security alarm will begin (works just for normal fall to help unlock pattern).
– VIBRATE – vibrate through security alarm.

Below Up Apk (Android Game)


Blow Up - an excellent game in which it is necessary, by means of a dynamite and other adaptations, to blow up a design. But it is necessary to make it so that, the bear sitting on it will fall together with it. And if he takes a star – you will have more points. By the way, the lower the construction falls, the better it will be.